IS1 Series Water Conditioners
Industrial Systems

Water-Right’s Industrial Series Water Conditioners are to be highly effective in all industrial applications requiring 113,000 to 592,000 grains of softening capacity with flow rates to 280 GPM. The IS Series can also provide for excellent removal of hardness, iron and manganese, along with pH correction. The IS Series solid brass controller can expanded for multiple tank configurations for applications requiring continuous soft water or higher flow rates.

Industrial System

For the removal of:
• hardness
• iron and manganese
• low pH correction

Literature pdf

Manual

IS Overview

IS2 Series

ISR Series
Capacity Specifications for the IS1
MODEL 2472-A 2472-B 3072-A 3072-B 3672-A 3672-B 4272-A 4272-B 4872-A 4872-B
Capacity/Lbs. of Salt Maximum 148,000/ 85 148,000/ 85 222,000/ 128 222,000/ 128 296,000/ 170 296,000/ 170 444,000/ 255 444,000/ 255 592,000/ 340 592,000/ 340
Medium 134,000/ 64 134,000/ 64 201,000/ 96 201,000/ 96 268,000/ 128 268,000/ 128 402,000/ 192 402,000/ 192 452,000/ 148 452,000/ 148
Minimum 113,000/ 37 113,000/ 37 170,000/ 56 170,000/ 56 226,000/ 74 226,000/ 74 339,000/ 111 339,000/ 111 452,000/ 148 452,000/ 148
Type of Media CR-100 CR-100 CR-100 CR-100 CR-100 CR-100 CR-100 CR-100 CR-100 CR-100
Iron & Mang. Capacity(1) 10 10 10 10 10 10 10 10 10 10
pH Capacity(2) 6 6 6 6 6 6 6 6 6 6
Continuous @ 15 PSI Pressure Drop(3) 68 120 72 158 78 185 84 200 86 213
Peak @ 25 PSI Pressure Drop(3) 94 170 102 212 107 250 118 268 119 280
Mineral Quantity (Cu. Ft.) 10 10 15 15 20 20 30 30 40 40
Backwash Rate (GPM)(4) 25 25 40 40 60 60 80 80 105 105
Pipe Size 2" 3" 2" 3" 2" 3" 2" 3" 2" 3"
Shipping Weight(5) 940 985 1380 1425 1840 1885 2650 2695 3425 3470
Tank Size Media Tank 24"(w) x 72"(h) 24"(w) x 72"(h) 30"(w) x 72"(h) 30"(w) x 72"(h) 36"(w) x 72"(h) 36"(w) x 72"(h) 42"(w) x 72"(h) 42"(w) x 72"(h) 48"(w) x 72"(h) 48"(w) x 72"(h)
Brine Tank 30"(w) x 50"(h) 30"(w) x 50"(h) 39"(w) x 48"(h) 39"(w) x 48"(h) 39"(w) x 48"(h) 39"(w) x 48"(h) 42"(w) x 60"(h) 42"(w) x 60"(h) 50"(w) x 60"(h) 50"(w) x 60"(h)

Notes: Resin Capacities based on industry standards. CR-100 and CR-200 interpolated from the ASC Series Water Conditioners.

(1) On waters that are prechlorinated or where other preoxidation occurs, iron or manganese can precipitate too small to be filtered.
(2) The pH of the influent water must be at least the specified number above. pH correction is dependent upon flow rate.
(3) Quality of water may vary depending upon flow rate and water conditions.
(4) Backwash rates may change depending on temperatures of water.
(5) Shipping weight is dry.

1900 Prospect Court • Appleton, WI • Phone: (920) 739-9401 • Fax: (920) 739-9406
©2004 Water-Right, Inc.